• +84 89 669 8881
  • |
  • info@everestmaterials.com

Weathercare Supreme

Weathercare Supreme is a premium architectural paint. This is a high quality paint with 100% water-based Acrylic that is resistant to algae, algae, mold and carbonate. Weathercare Supreme provides ultimate protection against the effects of the environment and weather. In addition, Weathercare Supreme creates a gentle shine, making the paint film resistant to alkalis, carbonization and waterproofing. Weathercare Supreme with outstanding properties protects the exterior surfaces, withstands the harshest weather conditions for up to 10 years, helping to keep your home clean and beautiful over time.


It is specially formulated to protect and decorate the exterior, painted or new surfaces such as drywall, cement, plaster frame, brick and wooden surfaces.


Super colorfast, absolutely waterproof from the outside, so it has high antibacterial, anti-algae and mildew resistance, protects the wall surface for up to 10 years. Good adhesion and high color fastness make the paint film easy to clean without fading. Resistant to carbonization. Resistant to dust and yellowing. Moderate gloss. Resistant to alkalization. Smooth surface finish. Low VOC concentration, environmentally friendly. Ease of construction and patching.


Ingredients: water-based acrylic.
Colorants: weather-resistant pigments and inorganic base colors combined with additives with anti-algae and anti-mold effects
Solvent: water
Density (kg/liter): 1.20 – 1.35
Solids Composition: About 42%
Drying time (temperature 27 ± 2oC and relative humidity 80 ± 5%)
Surface dry : 20 minutes
Dry hard : 1 hour
Recommended dry film thickness: 30 – 35 micron
Waiting time between 2 coats: 3 hours
Theoretical coverage: 11 – 14m2/liter
Color: Refer to Weathercare palette and Palette Fandeck
Gloss (viewed at 60o vertical): Semi-gloss
Storage: Keep in a cool and dry place
Application temperature: From 5oC – 40oC
Packing: 5 liters


Inorganic (30%); Polymer (50%); Water (15%). other substances (5%).


Paint is formulated for immediate use. However, if necessary, you can add 20% clean water for the first coat. For a beautiful surface, the following coats of paint should not be added with water.
1. The surface to be painted must be clean, dry, free of grease, impurities, chalk or peeling paint film.
2. High pressure water spray to remove excess paint, dust, dirt, algae or mold.
3. If the surface to be painted is mossy or moldy, it is recommended to use Seamaster FW103 mold killing solution, wash it, and let it dry before painting.
4. For unpainted or painted wall surfaces, it is necessary to apply 1 coat of Acryseal exterior primer and 2 coats of Weathercare Excel paint.
5. Keep out of reach of children.


Use a brush, roller or spray gun.