• +84 89 669 8881
  • |
  • info@everestmaterials.com

Syntalite Classic

Syntalite Classic is a premium exterior water-based paint that can withstand harsh weather conditions. Specially formulated to decorate exterior surfaces, Syntalite Classic has very good dust resistance and waterproofing ability, for high color fastness to keep your home clean and beautiful over time.

USES

Paint is suitable for the protection and decoration of previously painted and unpainted exterior surfaces such as mortar, cement, asbestos, brick, hard and soft boards or on properly primed wood surfaces.

FEATURE

Specially formulated for decorative exterior surfaces. Protect your home against the harsh elements of the weather. Good resistance to algae and mold. For high adhesion and durability. Washable, keep the color clear. Good alkali resistance. Excellent dust resistance. For perfect shading.

PHYSICAL PROPERTIES

Ingredients: Pure Acrylic
Color structure: Weather-resistant pigments, inorganic base colors combined with additives with anti-algae and anti-mold effects
Solvent: Water
Density (kg/liter): For light color color: 1.30 ~ 1.45 For medium gloss color:1.25~1.35 For deep gloss color:1.10 ~ 1.30
Solids Composition: Approximately 38%
Drying time (temperature 27 ± 2oC and relative humidity 80 ± 5%))
Surface dry : 20 minutes
Dry hard : 1 hour
Recommended dry film thickness: 30-35 microns
Waiting time between 2 coats: 3 hours
Theoretical coverage: 10.9 – 12.7 m2 / liter
Gloss (viewed at 85o vertical): Matte
Colors: Refer to the Syntalite palette and the Palette Fandeck palette.
Storage: Keep in a cool and dry place
Application temperature: From 5oC – 40oC

INGREDIENT

Inorganic (40%); Acrylic Polymer (40%); Water and Glycol solution (15%); other substances (5%).

USER MANUAL

Paint is formulated for immediate use. However, if necessary, no more than 20% water may be added to the first coat. For a beautiful surface, the following layers should not be mixed with water.
Surface to be painted must be clean, dry, free of grease, impurities, chalk or peeling paint film.
Spray water vigorously to remove excess paint, dust, dirt, algae or mold.
If the surface to be painted is mossy or moldy, it is recommended to use Seamaster FW103 mold killing solution, wash it, and let it dry before painting.
For unpainted or painted wall surfaces, it is necessary to apply one coat of Acryseal exterior primer and two coats of Syntalite Classic paint.
Keep out of reach of CHILDREN

CONSTRUCTION METHODS

Use a brush, roller or spray gun.