Product Description Jotun Texotile Paint

Jotun Texotile paint is an Acrylic-based paint used to create a variety of decorative patterns with low to high pattern / spike heights for interior and exterior surfaces. JOTUN TEXOTILE has 2 types of STANDARD and FINE. STANDARD is suitable for medium to tall patterns/thorns. FINE is suitable for small, smooth patterns/spikes.

Purpose of using Jotun Texotile Paint

Used to create pattern coating or create spikes on the surface of masonry walls, mortar, concrete, precast concrete.

Note

Thickness and rating of paint depends on pattern/thorn style.

The average norm is 0.9 – 1.5 kg/m2.

Physical properties

Color White
% solids volume* 75 ± 5
Viscosity
Shadows
Good water resistance
Solvent resistance
* According to ISO 3233:1998 (E)
Adhesion: > 0.55 N/mm²

Surface preparation

Surface to be painted must be undamaged, clean, free of dust, grease and cement resin, etc. For dirty and chalked surfaces, it is necessary to clean with a stiff bristle brush.

Other Surface Types

This paint can also be used on other types of surfaces. Please contact the Jotun office for more details.

Conditions during painting

Apply at temperatures between 10°C and 35°C. The surface temperature should be at least 3ºC above the dew point of the air. Ambient temperature and humidity are measured in the area around the surface.

Paint construction methods

Spindle roller or spike spray gun

Construction data

Mixing ratio (volume) 1 component paint
Water thinner/cleaner

Instruction data for common paint sprayers

Dry time
In general, drying time is often related and depends on factors such as air circulation, temperature, thickness, number of coats. The figures given below are based on the following conditions:
* Good ventilation (outdoor or with free circulation of air)
* Standard film thickness
* One layer on the surface of untreated steel
* Relative humidity at 70%
Surface temperature 23°C
3 hours surface dry
Dry hard 24 hours
Dry to apply next coat, at least 1 24 hours
The above parameters are for guidance only. The actual drying time before applying the next coat may be shorter or longer depending on the film thickness, ventilation, underlying coating system, requirements for early transport and assembly, etc. Drying time for a system The complete paint system is detailed in each separate system table, taking into account all the parameters and specific conditions.

Preserve

This product should be stored in accordance with the safety regulations of each country. It is best to store the product in a cool, dry place, combined with good ventilation. Away from sources of heat and ignition. Product containers must be tightly closed.

Transport

Careful shipping note. Stir well before use.

Packing size

5kg and 25kg (Vietnam).
Packing sizes may vary from country to country according to individual requirements.

Health and safety

See the safety notice on the paint can. Use in well ventilated conditions. Do not breathe vapor or spray. Avoid contact with skin. If skin contact occurs, wash off with soap, water or suitable detergent immediately. If in eyes, wash with clean water and seek medical attention immediately.