• +84 89 669 8881
  • |
  • info@everestmaterials.com

Acryseal Water Based Wall Sealer Exterior


Acryseal Water Based Wall Sealer Exterior is a water-based primer, especially resistant to alkalis, mildew and perfect waterproofing for exterior surfaces. Paint is used to prime old and new exterior surfaces such as brick, mortar, cement, asbestos…

Paint is suitable for the protection and decoration of previously painted and unpainted exterior surfaces. such as mortar, cement, asbestos, brick, hard and soft boards or on properly primed wood surfaces.

Gives high adhesion to the finish. Preserves color fastness of the finish. High permeability helps the finish to resist bad agents from the outside as well as from the inside. Anti-algae and mildew. Alkali resistant. Covers small cracks.

Ingredients: Water Based Acrylic Supplement
Color structure: Mainly Titanium Dioxide and inorganic base colors
Solvent: Water
Density (kg/liter): 1.09 ~ 1.15
Solids Composition: Approximately 32%
Drying time (temperature 27 ± 2oC and relative humidity 80 ± 5%))
Surface dry : 20 minutes
Dry hard : 1 hour
Recommended dry film thickness: 25 – 30 micron
Waiting time between 2 coats: 3 hours
Theoretical coverage: 10.6 – 12.8 m2 / liter
Gloss (viewed at 85o vertical): Glossy
Color: White
Storage: Keep in a cool and dry place
Application temperature: From 5oC – 40oC

Inorganic (20%); Acrylic Polymer (50%); Water and Glycol solution (25%); other substances (5%).
Paint is formulated for immediate use. It is best not to add water.
Surface to be painted must be clean, free of grease, impurities..
Spray water vigorously to remove excess paint, dust, dirt, algae or mold
Keep out of reach of CHILDREN.

Use a brush, roller or spray gun.